Giới Thiệu dòng sản phẩm máy chủ (server) SUN BLADE 6000 CHASSIS

[truongson]

Sun Blade 6000 Chassis Specifications
Architecture
Form Factor
10 rack units high (10RU), holding up to 10 server modules, nine server modules plus
one storage module, or any combination thereof; up to four Sun Blade 6000 chassis
supported per 42U rack
I/O Interfaces
The Sun Blade 6000 chassis mid-plane supports the following protocols:
PCIe 2.0, SAS 2.0, SATA 3.0, and Gigabit Ethernet (GbE)
Each server module has a direct connection to two PCIe ExpressModules (EMs) for
blade discrete I/O connectivity and two Network Express Modules (NEMs) for chassiswide, common I/O connectivity
I/O Modules
Up to 20 PCIe EMs per Sun Blade 6000 chassis (two EMs per blade server module)
Up to two NEMs per Sun Blade 6000 chassis
Manageability
Chassis Monitoring Module (CMMs)
Helps enable direct remote connection to the service processor on each blade server
Reduces cabling by providing a single management connection to the chassis
Helps ensure complete remote lights-out manageability of the whole chassis
Provides an optional aggregate point for monitoring of chassis fan and power supply
modules with the CMM’s own Integrated Lights Out Manager (ILOM) module
Environment
Temperature
Operating: 5°C to 32°C (41°F to 90°F)
Nonoperating: -40°C to 65°C (-40°F to 149°F)
Optimum Ambient
22°C (71.6°F)
Relative Humidity
Operating: 10%–90%, noncondensing, 27°C max. wet bulb
Nonoperating: 5%–93%, noncondensing, 38°C max. wet bulb

Altitude
Operating: Up to 3,048m (10,000 ft.), max. ambient temperature is derated by 1°C
per 300 m (984 ft.) above 900 m (2,953 ft.)
Nonoperating: Up to 12,000 m (39,370 ft.)
Sine Vibration
Operating: Z (vertical) axis: 0.15 G, X–Y axis: 0.10 G, 5 Hz–500 Hz sine
Nonoperating: Z (vertical) axis: 0.50 G, X–Y axis: 0.25 G, 5 Hz–500 Hz sine
Shock
3 Gs, 11 msec, half sine (rackmounted enclosure)
Acoustic Noise
LwAd (1 B = 10 dB) 8.6 B at or below 25°C, 9.2 B at max. ambient
AC Power
Power (1+1) high-efficiency, hot-swappable, load-sharing, load-balancing power
supply modules

AC input power: 1+1 PSU rating, 6,272 W, or 6,400 VA each power supply module
Voltage: 200–240 V AC
Frequency: 50 Hz–60 Hz
Current: 16 A per power supply input, total four AC inputs (two per power supply
module)
AC Input Connection
Americas/domestic: NEMA L6-20P to IEC 320-C19
International: IEC 309, 250 V, 16 A, 3Pin to IEC 320-C19
DC Power
DC output power: 1+1 PSU rating: 5,740 W each power supply module
Regulations
Product safety: UL/CSA 60950-1, EN 60950-1, IEC 60950-1 CB Scheme with all
country differences, IEC 825-1, 2, CFR 21 Part 1040, CNS 14336, GB 4943
RFI/EMI (Class A): EN 55022, 47 CFR 15B, ICES-003, VCCI, AS/NZ 3548, CNS
13438, KSC 5858, GB 9254, EN 61000-3-2, GB 17625.1, EN 61000-3-3, EN 300
386: v1.3.3
Immunity: EN 55024, EN 300 386: v1.3.3
Certifications
Product safety: cULus Mark, UL/Demko LVD, CE Mark 2006/95/EC), GOST-R, BSMI
RFI/EMI (Class A): CE Mark (89/336/EEC), FCC, ICES-003, VCCI, C-Tick, MIC,
GOST-R, BSMI
Immunity: CE Mark (89/336/EEC), MIC, GOST-R
Other: Labeled per WEEE (Waste Electrical and Electronic Equipment) Directive,
China RoHS Mark
Chassis Dimensions and Weight
Height: 438.15 mm (17.25 in.)
Depth: 692.15 mm (27.25 in.)
Width: 444.50 mm (17.50 in.)
Weight of a fully configured system: 159 kg (350 lb.)
Weight of an empty system (no fillers): 35.7 kg (78.7 lb.)

Subassembly Weights
Power supply module: 9.70 kg (21.38 lb.)
NEM: 1.75 kg (3.85 lb.)
PCIe EM: 0.41 kg (0.90 lb.)
Rear fan module: 1.04 kg (2.31 lb.)
CMM: 0.52 kg (1.15 lb.)
Front fan module: 0.88 kg (1.95 lb.)
Front indicator module: 0.34 kg (0.75 lb.)