X8DTT-HF+

Thông tin sản phẩm X8DTT-HF+

Key Features:

1. Intel® Xeon® processor 5600/5500 series, with QPI up to 6.4 GT/s
2. Intel® 5500 (Tylersburg) Chipset
3. Up to 192GB** DDR3 1333/ 1066/ 800MHz ECC Registered DIMM / 48GB Unbuffered DIMM
4. Dual Intel® 82574L Gigabit  Ethernet Controllers
5. 1 (x16) PCI-E 2.0 slot
6. Integrated Matrox G200eW Graphics
7. Integrated IPMI 2.0 with KVM and Dedicated LAN

Product SKUs MBD-X8DTT-HF+-B X8DTT-HF+(Bulk Pack)   Physical Stats Form Factor Proprietary Dimensions 16.64" x 6.8 " (42.26cm x 17.27cm)   Processor/Cache CPU Dual 1366-pin LGA Sockets Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below: Intel® Xeon®Processor 5600 Series (Westmere) Intel® Xeon®Processor 5500 Series (Nehalem-EP) QPI up to 6.4 GT/s   System Memory Memory Capacity 12x 240-pin DIMM slots Supports up to 192 GB** 1333 / 1066 / 800MHz DDR3 ECC Registered memory Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory Memory Mirroring supported Memory Type 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs DIMM Sizes 1GB, 2GB, 4GB , 8GB** , 16GB** Memory Voltage 1.5 V / 1.35 V Error Detection Corrects single-bit errors Detects double-bit errors (using ECC memory) Supports Intel® x4 and x8 Single Device Data Correction (SDDC)   On-Board Devices Chipset Intel® 5500 (Tylersburg) chipset ICH10R SATA Intel ICH10R SATA 3.0Gbps Controller RAID 0, 1, 5, 10 support (Windows) RAID 0, 1, 10 support (Linux) IPMI Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Winbond® WPCM450 BMC Network Controllers Dual Intel® 82574L Gigabit Ethernet Controller Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8201N PHY (dedicated IPMI) Graphics Matrox G200eW Super I/O Winbond W83527HG chip Clock Generator 932S421 chip Chassis ( Optimized for X8DTT-HF+) 2U Chassis CSE-217HQ-R1400B CSE-827H-R1200B CSE-827H-R1400B CSE-827HD-R1400B Important Chassis Notes To support the new generation Intel® Xeon® processor-based motherboards, a Revision K chassis is recommended for most models. Please talk to your sales representative or follow the link for details.   Expansion Slots PCI-Express 1 (x16) PCI-E 2.0 slot   Input / Output Serial ATA Six Serial ATA ports Six SATA hard drives supported Note: Requires BPN-827ADP-X8-H adapter LAN 2x RJ45 LAN ports 1x RJ45 Dedicated IPMI LAN port USB 2 rear + 1 header (2 Ports) 4 total USB ports, 2.0 Compliant / 1.1 Compliant VGA 1x VGA Port Serial Port 1 Fast UART 16550 serial port   System BIOS BIOS Type 32Mb SPI Flash EEPROM with AMI® BIOS BIOS Features Plug and Play (PnP) PCI 2.2 ACPI up to 3.0 USB Keyboard support   Management Software IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support SuperDoctor® III Watch Dog NMI Power Configurations ACPI Power Management Main Switch Override Mechansim Power-on mode for AC power recovery   PC Health Monitoring Voltage Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages. CPU Core 6-Phase-switching voltage regulator FAN Total of four 4-pin PWM fans 4x fans with tachometer monitoring Status monitor for speed control Status monitor for on/off control Low noise fan speed control (4-pin fan only) Temperature Monitoring for CPU and chassis environment CPU thermal trip support PSU I2C temperature sensing logic Thermal Monitor 2 (TM2) support PECI LED Power Fail / Overheat LED Suspend-state Indicator LED UID LED Other Features SDDC Support   Operating Environment / Compliance RoHS RoHS Compliant 6/6, Pb Free Environmental Spec. Operating Temperature: 10° to 35° C (50° to 95°F) Non-operating Temperature: -40° to 70° C (-40° to 158° F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5 to 95% (non-condensing)

Parts List (Bulk Package)   Part Number Qty Description X8DTT-HF+ MBD-X8DTT-HF+ 1 X8DTT-HF+ Motherboard