Thông tin sản phẩm X8DTT-HF+
Key Features:
1. Intel® Xeon® processor 5600/5500 series, with QPI up to 6.4 GT/s
2. Intel® 5500 (Tylersburg) Chipset
3. Up to 192GB** DDR3 1333/ 1066/ 800MHz ECC Registered DIMM / 48GB Unbuffered DIMM
4. Dual Intel® 82574L Gigabit Ethernet Controllers
5. 1 (x16) PCI-E 2.0 slot
6. Integrated Matrox G200eW Graphics
7. Integrated IPMI 2.0 with KVM and Dedicated LAN
![](http://www.supermicro.com/a_images/boxes/line_yellow.gif) |
MBD-X8DTT-HF+-B |
|
|
![](http://www.supermicro.com/a_images/boxes/line_yellow.gif) |
Form Factor |
|
Dimensions |
- 16.64" x 6.8 " (42.26cm x 17.27cm)
|
|
![](http://www.supermicro.com/a_images/boxes/line_yellow.gif) |
CPU |
- Dual 1366-pin LGA Sockets
- Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
- Intel®
Xeon®Processor 5600 Series (Westmere) - Intel®
Xeon®Processor 5500 Series (Nehalem-EP)
|
QPI |
|
|
![](http://www.supermicro.com/a_images/boxes/line_yellow.gif) |
Memory Capacity |
- 12x 240-pin DIMM slots
- Supports up to 192 GB** 1333 / 1066 / 800MHz DDR3 ECC Registered memory
- Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory
- Memory Mirroring supported
|
Memory Type |
- 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
DIMM Sizes |
- 1GB, 2GB, 4GB
, 8GB**
, 16GB**
|
Memory Voltage |
|
Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
|
|
![](http://www.supermicro.com/a_images/boxes/line_yellow.gif) |
Chipset |
- Intel® 5500 (Tylersburg) chipset
- ICH10R
|
SATA |
- Intel ICH10R SATA 3.0Gbps Controller
- RAID 0, 1, 5, 10 support (Windows)
- RAID 0, 1, 10 support (Linux)
|
IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Winbond® WPCM450 BMC
|
Network Controllers |
- Dual Intel® 82574L Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
Graphics |
|
Super I/O |
|
Clock Generator |
|
|
![](http://www.supermicro.com/a_images/pixel.gif) |
![](http://www.supermicro.com/a_images/pixel.gif) |
![](http://www.supermicro.com/a_images/boxes/line_yellow.gif) |
2U Chassis |
|
Important Chassis Notes |
- To support the new generation Intel® Xeon® processor-based motherboards, a Revision K chassis is recommended for most models. Please talk to your sales representative or follow the link for details.
|
|
![](http://www.supermicro.com/a_images/boxes/line_yellow.gif) |
PCI-Express |
|
|
![](http://www.supermicro.com/a_images/boxes/line_yellow.gif) |
Serial ATA |
- Six Serial ATA ports
- Six SATA hard drives supported
- Note: Requires BPN-827ADP-X8-H adapter
|
LAN |
- 2x RJ45 LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
USB |
- 2 rear + 1 header (2 Ports)
- 4 total USB ports, 2.0 Compliant / 1.1 Compliant
|
VGA |
|
Serial Port |
- 1 Fast UART 16550 serial port
|
|
![](http://www.supermicro.com/a_images/boxes/line_yellow.gif) |
BIOS Type |
- 32Mb SPI Flash EEPROM with AMI® BIOS
|
BIOS Features |
- Plug and Play (PnP)
- PCI 2.2
- ACPI up to 3.0
- USB Keyboard support
|
|
![](http://www.supermicro.com/a_images/boxes/line_yellow.gif) |
Software |
- IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
- SuperDoctor® III
- Watch Dog
- NMI
|
Power Configurations |
- ACPI Power Management
- Main Switch Override Mechansim
- Power-on mode for AC power recovery
|
|
![](http://www.supermicro.com/a_images/boxes/line_yellow.gif) |
Voltage |
- Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages.
- CPU Core 6-Phase-switching voltage regulator
|
FAN |
- Total of four 4-pin PWM fans
- 4x fans with tachometer monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control (4-pin fan only)
|
Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- PSU I2C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
LED |
- Power Fail / Overheat LED
- Suspend-state Indicator LED
- UID LED
|
Other Features |
|
|
![](http://www.supermicro.com/a_images/boxes/line_yellow.gif) |
RoHS
|
|
Environmental Spec. |
- Operating Temperature: 10° to 35° C (50° to 95°F)
- Non-operating Temperature: -40° to 70° C (-40° to 158° F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
|
|
|
![](http://www.supermicro.com/a_images/pixel.gif) |
![](http://www.supermicro.com/a_images/tabs/tab_parts_note.gif) |
![](http://www.supermicro.com/a_images/pixel.gif) |
![](http://www.supermicro.com/a_images/pixel.gif) |
![](http://www.supermicro.com/a_images/pixel.gif) |
![](http://www.supermicro.com/a_images/pixel.gif) |
![](http://www.supermicro.com/a_images/boxes/line_yellow.gif) |
|
Part Number |
Qty |
Description |
X8DTT-HF+ |
MBD-X8DTT-HF+ |
1 |
X8DTT-HF+ Motherboard |
|
|
|
|
Đánh giá cho sản phẩm X8DTT-HF+