H8QGL-6F+
- Nhà sản xuất: SUPERMICRO
- Mã sản phẩm: H8QGL-6F+-O
- Tình trạng: Còn hàng
- 0 VNĐ
- Giá chưa VAT: 0 VNĐ
Thông tin sản phẩm H8QGL-6F+
Supermicro motherboards
based on AMD's SR56x0/SP5100 chipset supports the new-generation AMD Opteron™
6000 series (6300P ready) processors (G34). This platform is built on a
consistent architecture delivering continued performance-per-watt leadership and
improved business capabilities by enhancing efficient 16/12/8/4-Core
capabilities, low-power/high-bandwidth DDR3, AMD Virtualization support.
Key Features:
1. Four AMD Opteron™ 6000 series (6300P ready) processors (Socket G34)
16/12/8/4-Core ready; HT3.0 Link support
2. AMD SR5690 + SP5100 Chipset
3. Up to 512GB DDR3 1866MHz ECC Registered DIMM; 16x DIMM sockets
4. Intel 82576 Dual-Port Gigabit Ethernet LAN
5. LSI 2008 8-Port 6 Gbps SAS Controller; RAID 0, 1, 10; RAID 5 optional
6. 6x SATA2 (3.0 Gbps) ports via AMD SP5100 Controller; RAID 0, 1, 10
7. Expansion slot: 1 PCI-E 2.0 x16, HyperTransport slot
8. Integrated Matrox G200eW Graphics
9. Integrated IPMI 2.0 with Dedicated LAN
Product SKUs |
Chassis ( Optimized for H8QGL-6F+ ) |
||
| MBD-H8QGL-6F+ | H8QGL-6F+(Standard Retail Pack) | 2U Chassis |
CSE-828TQ+-R1400LPB Requires rev. K chassis, air shroud MCP-310-82801-0N* CSE-828TQ+-R1K43LPB Requires rev. K chassis, air shroud MCP-310-82801-0N* |
Physical Stats |
|||
| Form Factor | SWTX | Tower / 4U Rackmount | CSE-418E16-R1K62B Requires air shroud MCP-310-84802-0B* CSE-748TQ-R1400B Requires rev. K chassis, air shroud MCP-310-74802-0B* CSE-748TQ-R1K43B Requires rev. K chassis, air shroud MCP-310-74802-0B* CSE-848A-R1K62B Requires air shroud MCP-310-84802-0B* CSE-848E16-R1K62B Requires air shroud MCP-310-84802-0B* |
| Dimensions | 16.48" x 13" (41.9cm x 33.0cm) | Note | * Sold separately, please refer to the chassis web spec for the air shroud info in the optional part list. |
Processor/Chipset |
System BIOS |
||
| CPU | Quad 1944-pin
Socket G34 Supports up to four 16/12/8/4-Core ready AMD Opteron™ 6000 Series processors HT3.0 Link support |
BIOS Type | 16Mb SPI Flash ROM with AMI® BIOS |
| Chipset | AMD SR5690 / SP5100 Chipset | BIOS Features | Plug and Play
(PnP) DMI 2.3 PCI 2.2 ACPI 2.0 USB Keyboard Support SMBIOS 2.3 |
System Memory |
Expansion Slots |
||
| Memory Capacity | 16 DIMM sockets Supprots up to 512GB Registered ECC or 128GB Unbuffered ECC/non-ECC DDR3 1866/1600/1333/1066 SDRAM in 16 DIMMs Quad channel memory bus |
PCI-Express | 1 PCI-E 2.0 x16 1 HyperTransport slot |
| Memory Type |
Registered ECC or unb. ECC / non-ECC DDR3 1600/1333/1066 MHz SDRAM 72-bit, 240-pin gold-plated DIMMs |
Management |
|
| DIMM Sizes | 1GB, 2GB, 4GB, 8GB, 16GB, 32GB | Software | IPMI (Intelligent
Platform Management Interface) 2.0 Super Doctor III |
| Memory Voltage | 1.35V or 1.5V | Power Configurations | ACPI Power
Management Wake-On-LAN (WOL) header Keyboard Wakeup from Soft-Off Power-on mode control for AC power loss recovery |
| Error Detection | Corrects
single-bit errors Detects double-bit errors (using ECC memory) |
PC Health Monitoring |
|
|
On-Board Devices |
CPU | Monitors CPU Core
Voltages, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, -12V Standby, VBAT,
HT, memory, chipset CPU switching voltage regulator |
|
| SATA | AMD SP5100 (RAID 0, 1, 10) | FAN | Up to 9-fan status
tachometer monitoring Up to nine 4-pin fan headers Status monitor for speed control 3-pin fan support (w/o speed control) Low noise fan speed control (4-pin fan only) Pulse Width Modulated (PWM) fan connectors |
|
SAS: LSI 2008 8 port SAS controller RAID 0, 1, 10; RAID 5 Optional Optional: AOC-SAS2-RAID5-KEY RAID 5 support |
Temperature |
Monitoring for CPU and chassis environment CPU Thermal Trip Support Thermal control for 9x fan connectors I2C Temperature Sensing Logic |
|
| IPMI | Support for
Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM over LAN support Winbond® WPCM+450 BMC |
LED | CPU / System
Overheat LED +5V Standby Alert LED |
| Network Controllers | Intel® 82576
dual-port Gigabit Ethernet LAN 10/100/1000BASE-T support |
Other Features | Chassis Intrusion
Detection Chassis Intrusion Header |
| VGA | Matrox G200eW 16MB DDR2 graphics | ||
| Super I/O | Winbond® W83527 chip | ||
|
On-Board Devices |
|||
| SATA | 6x SATA2.0 (3Gb/s) Ports | ||
| SAS:
Integrated LSI 2008 SAS2 Controller Eight Serial Attached SCSI (SAS) ports |
|||
| LAN | 2 RJ45 LAN ports 1 RJ45 Dedicated LAN supports IPMI |
||
| USB | 7x USB 2.0 ports 2x Rear, 2x internal headers-4x ports, and 1x type A |
||
| VGA | 1x VGA port | ||
| Serial Ports | 1x Fast UART 16550
serial port 1x serial port header |
||
| IPMI | 1x dedicated IPMI LAN port; WPCM450 | ||
| Others | 1 SATA DOM power connector, TPM header | ||
Retail Pack List |
|||
| Part Number | Qty | Description | |
| H8QGL-6F+ | MBD-H8QGL-6F+-O | 1 | H8QGL-6F+ Motherboard |
Tag: H8QGL-6F+-O