X9DBL-3F
- Nhà sản xuất: SUPERMICRO
- Mã sản phẩm: X9DBL-3F
- Tình trạng: Còn hàng
- 0 VNĐ
- Giá chưa VAT: 0 VNĐ
Thông tin sản phẩm X9DBL-3F
Key Features
1. Dual socket B2 (LGA 1356) supports Intel® Xeon® processor E5-2400 v2
2. Intel® C606 chipset
3. Up to 384GB DDR3 1600MHz LRDIMM / 192GB RDIMM; 6x DIMM slots
4. Expansion slots: 1 PCI, 3 PCI-E 3.0 x8, 1 PCI-E 3.0 x16, 1 PCI-E 3.0 x4 (in
x8)
5. Intel® 82574L GbE LAN, 2 ports
6. 4x SATA2 and 2x SATA3 ports
7. 8x SAS/SATA2 ports from C606
8. Integrated IPMI 2.0 and KVM with Dedicated LAN
9. 7x USB 2.0 ports (2 rear, 4 via header + 1 Type A)
Specifications
Product SKUs |
|
MBD-X9DBL-3F -O | X9DBL-3F (Standard Retail Pack) |
MBD-X9DBL-3F -B | X9DBL-3F (Bulk Pack) |
Physical Stats |
|
Form Factor | ATX |
Dimensions | 12" x 10" (30.48cm x 25.4cm) |
Processor/Cache |
|
CPU | Intel® Xeon® processor E5-2400 and
E5-2400 v2 (up to 95W TDP **) Dual Socket B2 (LGA 1356) |
Cache | Up to 25MB |
System Bus | QPI up to 8 GT/s |
Note | ** Motherboard supports this maximum TDP. Please verify your system can thermally support |
System Memory |
|
Memory Capacity | 6x 240-pin DDR3 DIMM slots Up to 384GB DDR3 ECC LRDIMM Up to 192GB DDR3 ECC Registered memory (RDIMM) Up to 48GB DDR3 ECC/non-ECC Un-Buffered memory (UDIMM) |
Memory Type | 1600/1333/1066/800MHz* ECC DDR3 SDRAM
72-bit, 240-pin gold-plated DIMMs Support ECC and non-ECC UDIMMs * Maximum memory speed may be capped by CPU. Please verify that the chosen CPU can support desired memory speed. |
DIMM Sizes | 32GB, 16GB, 8GB, 4GB, 2GB, 1GB, 64GB LRDIMM |
Memory Voltage | 1.5 V, 1.35 V |
Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) |
On-Board Devices |
|
Chipset | Intel® C606 chipset |
SATA | SATA 2.0 3Gbps with RAID 0, 1, 5, 10 SATA 3.0 6Gbps with RAID 0, 1, 5, 10 |
SAS | SAS from C606 RAID 0, 1, 10 support |
IPMI | Support for Intelligent Platform
Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Nuvoton WPCM450 BMC |
Network Controllers | Intel® 82574L Gigabit Ethernet Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8201F PHY (dedicated IPMI) |
Video | Matrox G200eW |
Input / Output |
|
SATA | 2x SATA 3.0 ports (6Gbps) 4x SATA 2.0 ports (3Gbps) |
SAS | 8x SAS/SATA2 ports |
LAN | 2 RJ45 Gigabit Ethernet LAN ports 1 RJ45 Dedicated IPMI LAN port |
USB | 7x USB 2.0 ports total (2 rear + 4 via header + 1 Type A) |
Video | 1 VGA port |
Serial Port / Header | 2x Fast UART 16550 ports / 1 rear and 1 header |
DOM | 1 DOM (Disk on Module) power connector |
Expansion Slots |
|
PCI-Express | 1x PCI-E 3.0 x16 3x PCI-E 3.0 x8 1x PCI-E 3.0 x4 (in x8) 1x PCI-32 (Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram for details.) |
System BIOS |
|
BIOS Type | 64Mb SPI Flash EEPROM with AMI BIOS |
BIOS Features | Plug and Play (PnP) APM 1.2 PCI 2.3 ACPI 1.0 / 2.0 / 3.0 / 4.0 USB Keyboard support SMBIOS 2.7.1 UEFI 2.3.1 |
Management |
|
Software | SuperDoctor® III Watch Dog NMI IPMI 1.5 / 2.0 |
Power Configurations | ACPI / APM Power Management Power-on mode for AC power recovery |
Note: For optimized or compatible chassis, additional parts may be repuired,
please check with Supermicro sales rep