SSD Micron M500DC, 480GB SATA 6Gb/s 20nm MLC 2.5" 7.0mm 3DWPD, MTFDDAK480MBB-1AE1ZABYY

Thông tin sản phẩm SSD Micron M500DC, 480GB SATA 6Gb/s 20nm MLC 2.5" 7.0mm 3DWPD, MTFDDAK480MBB-1AE1ZABYY

Micron M500DC 480GB, SATA 6Gb/s, MLC 2.5" 7.0mm
 Part Number: MTFDDAK480MBB-1AE1ZABYY
 
 Features (Micron M500DC 2.5 Inch SATA NAND Flash SSD)
 • Micron^® 20nm MLC NAND Flash
 • RoHS-compliant package
 • SATA 6 Gb/s interface
 • ATA modes supported
   - PIO mode 3, 4
   - Multiword DMA mode 0, 1, 2
   - Ultra DMA mode 0, 1, 2, 3, 4, 5
 • Enterprise sector size support
   - 512-byte
 • Hot-plug capable
 • Native command queuing support with 32-command slot support
 • ATA-8 ACS2 command set compliant
 • ATA security feature command set and password login support
 • Security erase command set: fast and secure erase
 • Self-monitoring, analysis, and reporting technology (SMART) command set
 • 120GB performance (steady state)^1,2
   - Sequential 128KB read: 425 MB/s
   - Sequential 128KB write: 200 MB/s
   - Random 4KB read: 63,000 IOPS
   - Random 4KB write: 23,000 IOPS
   - READ latency: 0.50ms
   - WRITE latency: 1.5ms
 • 240GB performance (steady state)^1,2
   - Sequential 128KB read: 425 MB/s
   - Sequential 128KB write: 330 MB/s
   - Random 4KB read: 63,000 IOPS
   - Random 4KB write: 33,000 IOPS
   - READ latency: 0.50ms
   - WRITE latency: 1.5ms
 • 480GB performance (steady state)^1,2
   - Sequential 128KB read: 425 MB/s
   - Sequential 128KB write: 375 MB/s
   - Random 4KB read: 63,000 IOPS
   - Random 4KB write: 35,000 IOPS
   - READ latency: 0.50ms
   - WRITE latency: 1.5ms
 • 800GB performance (steady state)^1,2
   - Sequential 128KB read: 425 MB/s
   - Sequential 128KB write: 375 MB/s
   - Random 4KB read: 65,000 IOPS
   - Random 4KB write: 24,000 IOPS
   - READ latency: 0.50ms
   - WRITE latency: 1.5ms
 • Reliability
   - Mean time to failure (MTTF): 2 million device hours³
   - Static and dynamic wear leveling
   - Uncorrectable bit error rate (UBER): <1 sector per 10¹⁶ bits read
   - End-to-end data protection
   - Enhanced power-loss data protection with data protection capacitor monitoring
 • Endurance: Total bytes written (TBW)
   - 120GB: 0.5PB; 240GB: 1.0PB; 480GB: 1.9PB; 800GB: 1.9PB
 • Capacity4 (unformatted): 120GB, 240GB, 480GB, 800GB
 • Mechanical: 7.0mm height
   - SATA connector: 5V ±10%
   - 2.5-inch drive: 100.2mm x 69.85mm x 7.0mm
   - Conforms to SFF standards
 • Field-upgradeable firmware
 • Power consumption: <6.0W (TYP); <6.3W (TYP) for 800GB
 • Operating temperature
   - Commercial (0°C to 70°C)⁵
 
 
 Notes:
     1. Typical I/O performance numbers as measured using Iometer with a queue depth of 32 and write cache disabled.
     2. 4KB transfers used for READ/WRITE latency values.
     3. The product achieves a MTTF based on population statistics not relevant to individual units.
     4. 1GB = 1 billion bytes; formatted capacity is less.
     5. Drive case temperature.