Supermicro AOM-CTG-i1SM / MicroLP single-port 10GbE with SFP+ connector for 12 node MicroCloud

0 đánh giá / Viết đánh giá

Nhà sản xuất: SUPERMICRO
Mã sản phẩm: Supermicro AOM-CTG-i1SM
Tình trạng: Còn hàng

0 VNĐ
Giá chưa VAT: 0 VNĐ

Số lượng

Thêm Yêu thích

Thêm so sánh

Mô tả
Đánh giá (0)

Thông tin sản phẩm Supermicro AOM-CTG-i1SM / MicroLP single-port 10GbE with SFP+ connector for 12 node MicroCloud

The AOM-CTG-i1SM 10 Gigabit Ethernet Adapter is the most flexible and scalable Ethernet adapter for today's demanding data center environments. Based on the Intel® 10GbE network controller 82599EN, the AOM-CTG-i1SM addresses the demanding needs of the next-generation data center by providing features for virtualization, flexibility for LAN and SAN networking, and proven reliable performance

Key Features

• Single SFP+ Connector

• MicroLP Form Factor

• PCI Express 2.0 (up to 5GT/s)

• Intel QuickData Technology

• VMDq, Next-Generation VMDq, and

• PC-SIG SR-IOV for Virtualized Environments

• Load Balancing on Multiple CPUs

• iSCSI Remote Boot Support

• Fibre Channel over Ethernet (FCoE) Support

• Support for most Network Operating Systems (NOSs)

• Support both DAC Twin Axial and LC Fiber-Optic Cables

• RoHS compliant 6/6

Compliance

RoHS Compliant 6/6, Pb Free

Specification

General

   - Intel® i350 GbE controller
   - Compact size microLP form factor
   - PCI-E 2.1 x4 (2.5GT/s or 5GT/s) interface
   - Dual RJ-45 connectors
   - Intel® PROSet Utility for Windows® Device Manager
   - Intel® I/O Acceleration Technology (I/O AT)
   - Power consumption: Typical 4W

Ethernet Features

   - IEEE 802.3 auto-negotiation for speed, duplex, & flow control
   - IEEE 802.3x and 802.3z compliant flow control support
   - Automatic cross-over detection function (MDI/MDI-X)
   - 1Gb/s Ethernet IEEE 802.3, 802.3u, 802.3ab PHY
     specifications Compliant
   - IEEE 1588 protocol and 802.1AS implementation

Power Management and Efficiency

   - IEEE 802.3az Energy Efficient Ethernet (EEE) which
    reduces power consumption of the PHY by about 50%
   - DMA Coalescing reduces platform power consumption
   - Active State Power Management (ASPM) support
   - LAN disable function
   - MAC Power Management controls
   - Low Power Link Up Link Speed Control

Virtualization Features

   - VM to VM Packet forwarding (Packet Loopback)
   - 8 TX and RX queue pairs per port to support VMWare
     NetQueue and Microsoft VMQ
   - Flexible Port Partitioning: 32 Virtual Functions
   - PC-SIG SR-IOV implementation
   - IEEE 802.1q VLAN support
   - IEEE 802.1q advanced packet filtering

Performance Features

   - TCP/UDP, IPv4 and IPv6 checksum offloads to improve
     CPU usage
   - Low Latency Interrupts
   - Tx TCP segmentation offload (IPv4, IPv6) increases
     throughput and lowers processor usage
   - Receive Side Scaling (RSS) for Windows environment,
     Scalable I/O for Linux environments
   - Jumbo Frames support up to 9.5K Bytes
   - Intelligent interrupt generation

Remote Boot Options

- Preboot eXecution Environment (PXE) support
- iSCSI remote boot for Windows, Linux, and VMware

OS Support

   - Windows® XP SP3, Vista SP2, 7 SP1 2003 SP2, 2008 SP2,
     2008 R2S
   - RedHat EL 5.5, 6.0; SuSe SLES 10 SP3, 11 SP1
   - FreeBSD 8.0
   - VMware ESX 4.0, 4.1, 5.0
   - Xen

Cables Support

- RJ-45 Category-5/5e up to 100m

Operating Conditions

- Operating temperature: 0°C to 55°C (32°F to 131°F)
- Storage temperature: -40°C to 70°C (-40°F to 158°F)

Physical Dimensions (L x H x D)

- Card PCB dimensions (without end brackets):
12.8cm (5.04in) x 5.0cm (1.97in) x 2.35cm (0.93in)

Đánh giá cho sản phẩm Supermicro AOM-CTG-i1SM / MicroLP single-port 10GbE with SFP+ connector for 12 node MicroCloud

Viết đánh giá

Tag: Supermicro AOM-CTG-i1SM, MicroLP single-port 10GbE, SFP+ connector for 12 node MicroCloud