APC Smart-UPS On-line RT 10000VA 230V 8000W, SURT10000XLI

Thông tin sản phẩm APC Smart-UPS On-line RT 10000VA 230V 8000W, SURT10000XLI

Model: APC Smart-UPS On-line RT 10000VA 230V 8000W

Part #: SURT10000XLI

SURT10000XLI

- APC Smart-UPS RT, 10000VA/8000W, Input 230V/Output 230V, Interface Port DB-9 RS-232, SmartSlot, Extended runtime model, 

- Typical Backup Time at Full Load 4.0 minutes (8000 Watts)

Includes: CD with software, Service Manual, Smart UPS signalling RS-232 cable, User Manual, Web/SNMP Management Card

Output

Output Power Capacity 8000 Watts / 10 kVA

Max Configurable Power 8000 Watts / 10 kVA

Nominal Output Voltage 230V

Output Voltage Note Configurable for 220 : 230 or 240 nominal output voltage

Efficiency at Full Load 92.0%

Output Voltage Distortion Less than 3%

Output Frequency (sync to mains) 50/60 Hz +/- 3 Hz user adjustable +/- 0.1

Other Output Voltages 220,240

Crest Factor 3 : 1

Waveform Type Sine wave

Output Connections

(1) Hard Wire 3-wire (H N + G) 

(4) IEC 320 C13 

(4) IEC 320 C19 

(4) IEC Jumpers 

Bypass Internal Bypass (Automatic and Manual)

Input

Nominal Input Voltage 230V

Input Frequency 50/60 Hz +/- 5 Hz (auto sensing)

Input Connections

Hard Wire 3 wire (1PH+N+G) 

Hard Wire 5-wire (3PH + N + G) 

Input voltage range for main operations 160 - 280V

Other Input Voltages 220,240

Input Total Harmonic Distortion Less than 7% for full load

Batteries & Runtime

Battery Type Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof

Included Battery Modules 4

Typical recharge time 2.20 hour(s)

Replacement Battery RBC44

RBC™ Quantity 2

Extended Run Options APC Smart-UPS RT 10000VA 230V

Runtime Graph

Curve Part Number(s)

A SURT10000XLI

B SURT10000XLI 

+ (1)SURT192XLBP

C SURT10000XLI 

+ (2)SURT192XLBP

D SURT10000XLI 

+ (3)SURT192XLBP

E SURT10000XLI 

+ (4)SURT192XLBP

Hover over the line on the graph above to view the runtime at any desired load

Curve fit to measured runtime data. All measurements taken with new, fully charged batteries, at typical environmental conditions, with no electrical input and balanced resistive load (PF = 1.0) output.

View Enlarged Graph View Runtime Chart

Communications & Management

Interface Port(s) DB-9 RS-232,RJ-45 10/100 Base-T,Smart-Slot

Pre-Installed SmartSlot™ Cards AP9631

Control panel LED status display with load and battery bar-graphs and On Line : On Battery : Replace Battery : Overload and Bypass Indicators

Audible Alarm Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm

Emergency Power Off (EPO) Yes

Surge Protection and Filtering

Filtering Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449

Physical

Maximum Height 432.00 mm

Maximum Width 263.00 mm

Maximum Depth 736.00 mm

Rack Height 6U

Net Weight 110.91 KG

Shipping Weight 129.09 KG

Shipping Height 552.00 mm

Shipping Width 597.00 mm

Shipping Depth 991.00 mm

Color Black

Units per Pallet 1.00

Environmental

Operating Environment 0 - 40 °C

Operating Relative Humidity 0 - 95%

Operating Elevation 0-3000 meters

Storage Temperature -15 - 45 °C

Storage Relative Humidity 0 - 95%

Storage Elevation 0-15000 meters

Audible noise at 1 meter from surface of unit 55.00 dBA

Online Thermal Dissipation 2262.00 BTU/hr