SuperServer 5019S-M2
- Nhà sản xuất: SUPERMICRO
- Mã sản phẩm: SuperServer 5019S-M2
- Tình trạng: Còn hàng
- 0 VNĐ
- Giá chưa VAT: 0 VNĐ
Thông tin sản phẩm SuperServer 5019S-M2
Key Features
• Embedded
• Security and Surveillance
• Appliance Server, Secure Storage
1. Single socket H4 (LGA 1151) supports Intel® 6th Gen. Core i7/i5/i3 series,
Intel® Celeron® and Intel® Pentium® processors
2. Intel® Q170 Express chipset
3. 4x 3.5" Hot-swap SATA3 bays, Intel RST
4. Up to 64GB Unbuffered Non-ECC UDIMM DDR4 2133MHz; 4 DIMM slots
5. 1x PCI-E 3.0 x16 FH, FL slot
6. 1x GbE LAN w/ Intel® i210-AT, 1x GbE LAN w/ Intel® PHY i219LM
7. Integrated IPMI 2.0 and KVM with Dedicated LAN
8. I/O ports: 1x VGA, 2x COM, 4x USB 3.0 (2 rear), 9x USB 2.0 (2 rear, 1 Type
A), 2x serial header, 1x SuperDOM (shared) audio header
9. 350W High-efficiency Power Supply
Specifications
Product SKUs |
|
SYS-5019S-M2 | SuperServer 5019S-M2 (Black) |
Motherboard |
|
Super X11SSZ-QF | |
Processor/Cache |
|
CPU | Intel® 6th Gen
Core i7/i5/i3 series, Intel® Celeron®, Intel® Pentium® processors; CPU
TDP support up to 95W TDP Single Socket H4 (LGA 1151) |
System Memory |
|
Memory Capacity | 4x 288-pin DDR4
DIMM slots Up to 64GB DDR4 ECC UDIMM |
Memory Type | 2133/1866/1600MHz Non-ECC DDR4 SDRAM 72-bit, 288-pin (UDIMM) gold-plated DIMMs |
DIMM Sizes | 16GB, 8GB, 4GB |
Memory Voltage | 1.2 V |
On-Board Devices |
|
Chipset | Intel® Q170 Express chipset |
SATA | SATA3
(6Gbps) via Intel® Q170 Express controller RAID 0, 1, 5, 10 support |
IPMI | Support for
Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2400 BMC |
Network Controllers | Intel® PHY i219LM
+ Intel® i210AT Gigabit Ethernet LAN Controllers Virtual Machine Device Queues reduce I/O overhead Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
Audio | RealTek ALC 888S High Definition Audio |
Graphics | ASPEED AST2400 BMC and Intel HD Graphics 530 |
Input / Output |
|
SATA | 4x SATA3 (6Gbps) ports |
LAN | 2x RJ45 Gigabit
Ethernet LAN ports 1x RJ45 Dedicated IPMI LAN port |
USB | 2x USB 3.0 ports
(2 rear) 3x USB 2.0 ports (2 rear + 1 Type A) |
Audio | Front panel header |
Video/Display | 2x DP (Display
Port), 1x DVI-I from Intel® HD Graphics, 1x VGA from AST2400 3x Independent Displays from Processor Graphics, VGA is from AST2400 for BMC KVM |
Serial Port / Header | 2x serial headers |
SuperDOM | 1x SuperDOM (Disk on Module) ports with built-in power |
System BIOS |
|
BIOS Type | 128Mb SPI Flash EEPROM with AMI BIOS |
BIOS Features | Plug and Play
(PnP) DMI 2.3 PCI 3.0 ACPI 5.0 USB Keyboard support Hardware BIOS Virus protection SMBIOS 3.0 UEFI 2.3.1 RTC (Real Time Clock) Wakeup |
Management |
|
Software | AMT IPMI 2.0 with KVM support NMI vPro Watch Dog SuperDoctor® 5 |
Power Configurations | ACPI Power
Management Keyboard Wakeup from Soft-Off CPU Fan auto-off in sleep mode Power-on mode for AC power recovery |
Chassis |
|
Form Factor | 1U Rackmount |
Model | CSE-813MFTS-350CB |
Dimensions and Weight |
|
Height | 1.7" (43mm) |
Width | 17.2" (437mm) |
Depth | 23.4" (594mm) |
Package | 8.5" (H) x 24" (W) x 29.5" (D) |
Weight | Gross Weight: 30.4
lbs (13.8 kg) Net Weight: 17.6 lbs (8 kg) |
Available Colors | Black |
Front Panel |
|
Buttons | Power On/Off
button System Reset button |
LEDs | Power LED Hard drive activity LED 2x Network activity LEDs System Overheat LED |
Expansion Slots |
|
PCI-Express | 1x PCI-E 3.0 x16 FH, FL slot |
Drive Bays |
|
Hot-swap | 4x 3.5" Hot-swap SATA3 drive bays |
Backplane |
|
SAS/SATA
HDD Backplane (SAS support requires optional SAS controller) |
|
System Cooling |
|
Fans | 3x 4cm internal fans |
Power Supply |
|
350W AC power supply w/ PFC | |
AC Voltage | 100-240 V, 50-60 Hz, 4.2-1.8 Amp |
+5V | 18 Amp |
+5V standby | 3 Amp |
+12V | 29 Amp |
+3.3V | 15 Amp |
Certification | Gold Certified |
PC Health Monitoring |
|
Voltage | Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +5V Standby, VBAT, HT, Memory, Chipset Voltages. |
FAN | Total of 6 fan
headers supporting up to 6 fans 6 fans with tachometer status monitoring Status monitor for speed control Status monitor for on/off control Low noise fan speed control Pulse Width Modulated (PWM) fan connectors |
Temperature | Monitoring for CPU
and chassis environment CPU thermal trip support I2C temperature sensing logic Thermal Monitor 2 (TM2) support PECI |
LED | CPU / System
Overheat LED Suspend static indicator LED UID/Remote UID |
Other Features | Chassis intrusion
detection Chassis intrusion header RoHS, Halogen Free |
Operating Environment |
|
RoHS | RoHS Compliant |
Environmental Spec. | Operating
Temperature: 10°C to 35°C (50°F to 95°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing) |
Parts List - (Items Included) |
|||
Part Number | Qty | Description | |
Motherboard / Chassis | MBD-X11SSZ-QF | 1 | Super X11SSZ-QF Motherboard |
CSE-813MFTS-350CB | 1 | 1U Chassis | |
Air Shroud | MCP-310-19007-0N | 1 | SC811/SC512L/SC512F/SC813M/SC113M/SC513L-410B/SC513L-420B/SC513F, UP X9SRE/I, X9 Mylar Air Shroud, 12"x9.6" MB |
Backplane | BPN-SAS3-815TQ-P | 1 | 1U 4-Port 12Gbps Backplane Supports 4x3.5" SAS/SATA HDD/SSD |
Cable 1 | CBL-0186L | 1 | SET OF 4 SATA 56/45.5/35/23CM ROUND S-RA. 26AWG |
Cable 2 | CBL-CDAT-0661 | 1 | 8 pin to 8 pin round SGPIO cable, 40cm, 28AWG, pinout 1-1,RoHS/REACH |
Parts | MCP-120-00031-0N | 1 | Riser card bracket for SC812,813,813M,815,111,113,113M |
Drive Tray(s) | MCP-220-00129-0B | 1 | Black 2x USB3.0/COM port tray in slim FDD bay |
Manual | MNL-5019S-M2-QRG | 1 | 5019S-M2 QRG |
Riser Card | RSC-RR1U-E16 | 1 | RSC-RR1U-E16 with PCI-E x16 output |
Heatsink / Retention | SNK-P0046P | 1 | 1U PASSIVE CPU HS FOR INTEL LGA1156 |
Power Supply | PWS-350-1H | 1 | 1U Single AC-DC 350W Platinum Level, multiple output power supply |